Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
  • Where available, URLs for the references have been provided.
  • The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.

Author Guidelines

GUIDELINES FOR AUTHORS

 

Purpose

 

The Romanian Journal of Emergency Surgery - RoJES (ISSN: XXXX-XXXX, ISSN Online: XXXX-XXXX) is the official publication of the Romanian Society of Emergency Surgery and Trauma. The aim of this journal is to publish original research on emeregency surgery fields such as general surgery, chest surgery, orthopedic surgery, neurosurgery, plastic surgery, head and neck surgery, gynecology and ophthalmology, emergency medicine, anesthesiology, neuro-psychiatrics, and radiology including interventional radiology.

The journal uses double blind review, meaning that the names of both reviewers and authors are hidden from each other.

The papers submitted should refer to any emergency surgery topic.

 

 

Article submission

 

Submitted articles can be included in one of the four categories below:

 

  1. Original papers
  2. Reviews
  3. Clinical cases
  4. Historical notes

 

The first step is submitting the article on the RoJES web page:

http://www.rojes.org

The articles will be evaluated by our editors and, once a decision on its publication is reached, the author will be contacted by email or phone.

The article must be sent by only one author, so that he can receive all the notifications and answer them promptly.

Works that do not meet the criteria mentioned in this document or works not considered as a priority by the journal’s scientific reviewers will be returned to the authors.

The selection criteria include: the importance of objectivity and scientific information, clarity, and brevity of exposure. The authors assume responsibility, in accordance with the principles of ethics and scientific truth in getting data and presenting the results.

The journal and articles published herein are protected under the law on Copyright.

 

 

 

 

 

 

 

Article content

 

Articles will be submitted exclusively in English.

 

Articles sent for publication must include:

 

  1. Title page containing: article title, name of the authors with their academic degrees and institutes or departments to which they belong, the author responsible for correspondence (name, postal address, phone number, e-mail, fax) and acknowledgments (if necessary).

 

  1. Manuscript which will contain:
  2. Title
  3. Short title – if the title is longer than 90 characters including spaces
  4. Abstracts – given that this will be indexed in an electronic abstracts databases, it should be carefully written, reflecting the content and relevance of the article, while complying with orthographic and linguistic rules. The abstract should be structured as a single text block (no paragraphs) with less than 250 words and must not contain references.
  5. Keywords3-5 representative keywords
  6. The article text will have a structure adapted to the material type:

 

Original works and Reviews must include: introduction, materials and method (referring to the selection of participants, inclusion and exclusion criteria, technical information, statistical method used for the calculation of the data), results, discussions and conclusions.

 

Clinical cases must include: introduction, presentation of the case, discussions and conclusions.

 

The size of the texts (including the bibliography) shall not exceed: 15 pages for a review, 12 pages for an original research, 6 pages for a case presentation and historical notes.

 

Bibliography

 

The bibliography should comply with the Recommendations of International Committee of Medical Journal Editors as follows:

 

Authors should provide direct references to original research sources whenever possible. Although references to review articles can be an efficient way to guide readers to a body of literature, review articles do not always reflect original work accurately. On the other hand, extensive lists of references to original work on a topic can use excessive space. Fewer references to key original papers often serve as well as more exhaustive lists, particularly since references can now be added to the electronic version of published papers, and since electronic literature searching allows readers to retrieve published literature efficiently.

 

Do not use conference abstracts as references: they can be cited in the text, in parentheses, but not as page footnotes. References to papers accepted but not yet published should be designated as “in press” or “forthcoming.” Information from manuscripts submitted but not accepted should be cited in the text as “unpublished observations” with written permission from the source.

 

Avoid citing a “personal work” unless it provides essential information not available from a public source, in which case the name of the person and date of communication should be cited in parentheses in the text. The limit of accepted auto-citing is 10%.

 

We reserve our right to check the accuracy of all reference citations to avoid errors.

 

IEEE citation style includes in-text citations, numbered in square brackets [X], which refer to the full citation listed in the reference list at the end of the paper. The reference list is organized numerically, not alphabetically.

Place bracketed citations within the line of text, before any punctuation, with a space before the first bracket.

Number your sources as you cite them in the paper. Once you have referred to a source and given it a number, continue to use that number as you cite that source throughout the paper.

When citing multiple sources at once, the preferred method is to list each number separately, in its own brackets, using a comma or dash bteween numbers, as such: [1], [3], [5] or [1] - [5].

The below examples are from Murdoch University's IEEE Style LibGuide.

Examples of in-text citations:

"...end of the line for my research [13]."

"This theory was first put forward in 1987 [1]."

"Scholtz [2] has argued that..."

"Several recent studies [3], [4], [15], [16] have suggested that...."

"For example, see [7]."

 

The Reference List appears at the end of your paper and provides the full citations for all the references you have used.  List all references numerically in the order they've been cited within the paper, and include the bracketed number at the beginning of each reference.

Title your list as References either centered or aligned left at the top of the page.

The author's name is listed as first initial, last name. Example: Adel Al Muhairy would be cited as A. Al Muhairy (NOT Al Muhairy, Adel).

The title of an article is listed in quotation marks.

The title of a journal or book is listed in italics.

The below examples are from the IEEE Citation Reference Guide and Murdoch University's IEEE Style LibGuide.

 

 

 

Examples of citations for different materials:

Material Type

Works Cited

Book in print

[1] B. Klaus and P. Horn, Robot Vision. Cambridge, MA: MIT Press, 1986.

Chapter in book

[2] L. Stein, “Random patterns,” in Computers and You, J. S. Brake, Ed. New York: Wiley, 1994, pp. 55-70.

Journal article

[4] J. U. Duncombe, "Infrared navigation - Part I: An assessment of feasability," IEEE Trans. Electron. Devices, vol. ED-11, pp. 34-39, Jan. 1959.

Conference paper

[7] L. Liu and H. Miao, "A specification based approach to testing polymorphic attributes," in Formal Methods and Software Engineering: Proceedings of the 6th International Conference on Formal Engineering Methods, ICFEM 2004, Seattle, WA, USA, November 8-12, 2004, J. Davies, W. Schulte, M. Barnett, Eds. Berlin: Springer, 2004. pp. 306-19.

Technical report

[10] J. H. Davis and J. R. Cogdell, “Calibration program for the 16-foot antenna,” Elect. Eng. Res. Lab., Univ. Texas,
Austin, Tech. Memo. NGL-006-69-3, Nov. 15, 1987.

Thesis/Dissertation

[1] J. O. Williams, “Narrow-band analyzer,” Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.

 

 

 

Technical instructions

 

Authors should send us the final version of the article. Future changes would be done only upon the editor’s request.

The authors will use symbols of the Système Internationale d'Unités and their abbreviations. Other official abbreviations and acronyms must be defined when used for the first time in the text, even after they have been defined in the abstract. Do not use abbreviations in title and in key words.

Tables and figures (graphs, charts, drawings, photographs) will have titles, will be numbered (figures separate from tables) and will include a legend (if needed) and will be mentioned in text.

Graphs will indicate the scale and units of measurement.

Photos will have a minimum resolution of 300 dpi and should be well focused. Unclear or pixilated photos can we rejected by editors.

The authors must have the rights of using and publishing all the tables, graphs and photos.

 

 

 

 

 

The article must be sent as a Microsoft Word document (*.doc or *.docx) and should comply with the following rules:



 

  1. Font:
    • Times New Roman
    • 12 pc.
  2. Indents and Spacing: General:
    • Alignment: justify
    • Outline level: body text
    • Indentation: left: 0
    • Right: 0
    • Special: none
    • Spacing: single line
    • Before: 0
    • After: 0
    • Line spacing: single
  3. Page Layout:
    • Margins:
    • Top: 2.5cm
    • Bottom: 2.5cm
    • Left: 2.5cm
    • Right: 2.5cm
    • Gutter: 0
    • Gutter position: left
  4. Orientation: portrait
  5. Pages: multiple pages: normal
  6. Use only RETURN key to jump to next row or to indicate the end of a paragraph



 

 

Copyright and patient confidentiality

 

All authors will be asked to complete a Copyright Transfer Agreement, transferring copyright for the article to the Publisher and declaring any competing of interests.

Once accepted for publication, the article may not be published elsewhere. Upon acceptance of an article by the Journal, the author(s) implicitly transfer(s) the copyright of the article to the Publisher. The copyright covers the exclusive and unlimited rights to reproduce and distribute the article in any form of reproduction (including electronic media); it also covers translations for all languages and countries. This transfer ensures the widest possible dissemination of information. 

Our policy about patient rights is based on the principle of confidentiality and the traditions of medical ethics.

Any article that contains personal medical information about an identifiable living individual should be accompanied by the patient’s explicit consent before publication.

If consent cannot be obtained, the publication will be possible only if the information can be sufficiently anonymised. In such cases the following note should be inserted at the end of the paper: Detail has been removed from this case description/these case descriptions to ensure anonymity. The editors and reviewers have seen the detailed information available and are satisfied that the information backs up the case the authors are making.

If the patient is dead the Data Protection Act does not apply, but the authors should seek permission from a relative (as a matter of courtesy and medical ethics).

Our policy on obtaining consent for publication of pictures of patients is a subset of our general policy on patient confidentiality. If there is any chance that a patient may be identified from a photograph or other image or from its legend or accompanying text we need the patient’s written consent to publication in the JSS.

Images – such as X rays, laparoscopic images, ultrasound images, pathology slides, or images of indistinctive parts of the body – may be used without consent as long as they are anonymised.

 An exception to this policy of needing consent for recognizable photographs of individuals is when we use photographs from picture agencies.

 

For any information, please contact us at editor@rojes.org.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.